About This

• COMPATIBILITY: The HME heat moisture ex-change filter fit for Z1, Z2, the filter is connected between hose/tubing, to determine whether it fit for your machine, compare the diameter of our filter pipe with the diameter of your machine pipe diameter. HME heat exchanger filter online humidification solution unit effectively addresses issues such as poor coordination, low humidity control accuracy, and difficulty in ensuring cleanliness caused by the separation of humidification equipment from the filtration system
• PACKAGE INCLUDES : Includes 6 x HME Heat Moisture Exchanger Filter in-Line Humidification Solution Unit. For safety reasons, each upgraded HME filter is sealed separately and kept away from air before use to ensure effectiveness each time it is used. Outer diameter on both ends: 25mm / 22mm. The heat exchanger filter is a waterless humidification device that does not require power. The high-density sponge filter absorbs heat and moisture from the environment and exhaled breath. After filtration, the hot and humid gas is recirculated into the intake airflow
• UPGRADE THE DESIGN: HME Filters is an integrated device that combines the functions of filtration and humidification. The heat exchanger filter consists of a thick transparent housing and a blue sponge filter. The transparent casing makes it easy to see whether the product is installed correctly. The blue sponge filter in the middle operates in an online mode, which can adjust the humidity level in the airflow in real time and simultaneously filter impurities in the air, ensuring that the output airflow not only meets the humidity requirements but also complies with cleanliness standards. The HME online heat and moisture exchange filter has a compact structure and is easy to carry
• FREQUENT REPLACEMENT : In order to maintain the performance and efficiency of the ventilation system, it is recommended to replace our HME heat moisture ex-change filter every week. The replacement frequency of the filter may vary depending on environmental conditions and usage time. When not in use, should be stored in sealed plastic bags and kept away from air to prevent the absorption of water vapor from the air, which may affect the use of HME filters
• VERY EASY TO INSTALL: Connect the filter between your mask and the oil pipe. Attach the larger diameter end to the mask and the smaller diameter end to the pipe. After connection, turn on the device and experience the continuous flow of humidifying gas. During the installation process, make sure that both connectors are completely fixed and firmly fastened. Note: The heat and moisture exchange filter is not suitable for masks with short interfaces. Please check the size you need before purchasing.The dense sponge will naturally absorb heat and moisture from your breathing and recycle them to keep the air comfortable and moist